Fittings & Accessories

Fiber-Duct™ 1 FiberRunner® 1 Next Frame 1 PowerFlex® AFE 1

Coupling 12 External Elbow 12 Wire Clip 9 Support Clip 4 Connector 3 Mounting Strap 3 Right Angle Fitting 3 Box Connector 2 Bushing 2 Conduit Connector 2 Drop Ceiling/Entrance End Fitting 2 Inside Corner 2 Cable Connector 1 Ceiling Fitting 1 Closure Strip 1 Outside Corner Fitting 1 Raceway Decorator Plate 1 Surface Raceway 1 Unloaded Module 1 Tee 21 Faceplate 9 Bracket 6 Device Plate Fitting 5 Coupler 4 Tee Fitting 4 Blank Cover 3 Cover Plate 3 Drop Ceiling Connector 3 End Cap 3 External Elbow Fitting 3 Flush Type Extension Adapter 3 Split Cover 3 45° Angle Fitting 2 Corner Coupling 2 Device Bracket 2 Device Bracket Fitting 2 Device Plate 2 Divider 2 Divider Clip 2 Elbow Cover 2 Express On Floor Kit 2 Express Under Carpet Kit 2 Horizontal Tee 2 Raceway Cover 2 Receptacle Cover Fitting 2 Reducer 2 Seam Clip 2 Trapeze Bracket 2 Wall Box Connector 2 90° Right Angle 1 Backfeed Coupling Fitting 1 Blank Raceway End 1 Braces and Bracket 1 Cable Retainer 1 Cantilever Bracket 1 Channel Coupler 1 Clip Cover 1 Connector Fitting 1 Cover Clip Fitting 1 Cross 1 Cross Cover 1 Cross Fitting 1 Decorator Cover Plate 1 Decorator Plate 1 Device Mounting Bracket 1 Device Mounting Bracket Fitting 1 Duplex Receptacle Plate 1 EMT Connector 1 Electrical Device Bracket Fitting 1 End Blank 1 End Fitting 1 End Plate 1 End Reducing Connector Fitting 1 Extension Box 1 Flat Elbow Fitting 1 Flush Plate Adapter 1 Horizontal Wall Box Adapter 1 Internal Corner Coupling 1 Internal Corner Coupling Fitting 1 Internal Elbow Fitting 1 Left End Cap Fitting 1 Outside Corner 1 Overfloor Raceway Cover Removal Tool 1 Overfloor Raceway External Elbow 1 Panel Connector 1 Quarter-Round Trim Fitting 1 Raceway 1 Raceway Blank Device Plate 1 Raceway Coupling 1 Raceway Flexible Section 1 Raceway Single Compartment Base 1 Radiused Full Capacity Divided Tee Fitting 1 Radiused Full Capacity External Elbow Fitting 1 Radiused Full Capacity Flat Elbow Fitting 1 Reducer Adapter 1 Right End Cap Fitting 1 Rigid Coupling 1 Seam Clip Fitting 1 Side Reducing Connector 1 Single Channel Duplex Device Plate Fitting 1 Single Channel MAB Device Plate Fitting 1 Single Channel NEMA Device Plate Fitting 1 Snap-Close Latch Wire Clip 1 Spill Over Junction with 2x2 Exit 1 Spill Over Junction with 4x4 Exit 1 Spill-Over Cover 1 Spillout 1 Strut Bracket 1 Strut Clip Kit 1 Supporting Clip 1 Supporting Clip Fitting 1 Surface-Mount Box 1 Tee Split Cover 1 Trumpet 1 Trumpet Spillout Fitting 1 Twin Cover 1 Twin Snap Cover Wire Clip 1 Vertical Tee with Hinged Door 1 Wall Box Adapter 1 Z Channel Rack 1

14 ga Cold Rolled Steel 1 Rigid PVC, ABS 1 Steel, PVC 1

Dark Gray 1 Designer Ivory 1 Ivory, Fog White 1 Ivory, Gray 1 Ivory/Gray 1 Ivory/White 1

Horizontal 3 1-Channel 2 Multiple-Channel 2 Non-Metallic 2 Plugmold 2 1-Port, Flat 1 1-Unit, Flat Surface, Vertical Mount 1 Cable Retainer 1 Low Profile, 2 Gang 1 Multi-Outlet Power, 1-Channel, Screw-On Mount 1 Non-Metallic, Plugmold, Single Channel 1 Open, Adjustable Offset 1 Open, Combination 1 Outside Vertical 1 Rectangular 1 Residential/Commerical 1 Round, 1-Channel, Non-Metallic 1 Round, Fully Adjustable 1

3/4 x 3/8 in 4 1-1/2 in 3 1-11/16 x 5-1/4 in 3 1-1/2 x 3-1/8 in 2 1/2 in 2 3-1/2 in 2 2-3/4 in 1 2-5/8 in 1 4 in 1 4-1/8 in 1 4-11/16 x 4-1/8 in 1 5-3/4 in 1 8 in 1 8-1/16 x 8-1/16 in 1

1-3/4 in 1 1.59 in 1 1.75 in 1 1/2 in 1 114 mm 1 13.92 in 1 15.24 in 1 18.07 in 1 2-1/8 in 1 2-3/8 in 1 3-1/4 in 1 3-7/16 in 1 4-3/4 in 1 5-3/16 in 1 5-5/32 in 1 8 in 1 NA 1

Gray/Enamel 1

13/16 x 1-11/16 in 1 3/4 in 1 4-1/2 in L 1 5-3/32 in OD x 3/4 in L 1 5/8 x 1-1/8 in 1