Small Crimp & Wire Connectors

Wide Range/Ergonomic, Compact Design, Winged 2 Model 61® Connector 1 Twist 1 Wire Connector, Type II Winged 1 Ring Terminal 273 Disconnect 103 Locking, Short Sleeve 55 Bell End 52 Loose-Piece 45 Tubular Ring Compression Lug 36 Fork Terminal 35 Locking Fork Terminal 22 E1 Plus Solid State Relay 21 Open Jaw Fork 19 Wire Joint 18 Interlocking Armored, Riser 16 Nylon Insulated Fork Terminal 13 Twist-On 13 Vinyl Insulated Male Disconnect 11 Motor Lead Female Disconnect 10 Bimetallic 9 Flanged Tongue, Short Sleeve 9 Heat Shrinkable, Locking 9 Butt Splice 8 Compact 8 Expanded 8 Heat Shrink 8 Non-Insulated 8 One Load 8 Short Sleeve, Insulated 8 Standard 8 Heavy Duty, Short Sleeve 7 Non-Insulated, Locking, Short Sleeve 7 Non-Winged 7 Vinyl Insulated Female Disconnect 7 Insulated, Locking, Short Sleeve 6 Insulated, Short Sleeve 6 Non-Insulated Female Disconnect 6 Non-Insulated Ring Terminal 6 Ring Tongue 6 Insulated, Locking 5 Manual 5 Non-Insulated, Rectangular 5 Standard Version, Short Sleeve, Insulated 5 Straight 5 Vinyl Insulated Fork Terminal 5 Vinyl Insulated Ring Terminal 5 3-Inlet/Outlet, Round, Flanged 4 Aluminum Pin Terminal 4 Bi-Metal 4 Expanded, Locking 4 Flat 4 Insulated, Offset 4 Locking 4 Non-covered Ferrules 4 Wing 4 YS-A, Standard Barrel 4 Covered Single Wire Ferrule 3 Flanged, Insulated 3 Long Sleeve, Round, Offset 3 Loose Piece 3 Non-Insulated Male Disconnect 3 Non-Insulated, Locking 3 Non-Insulated, Sleeve 3 Nylon Insulated Flanged Fork Terminal 3 Polypropylene Insulated Ferrule 3 Short Barrel 3 Short Sleeve, Locking 3 TP, Short Sleeve 3 TP-F, Short Sleeve 3 Vinyl Insulated Locking Fork Terminal 3 90° 2 AYPO, Offset 2 Bi-Metal, Short Sleeve 2 Compression 2 Covered Single Wire, Strip-On 2 ELT:COPPER E CRIMP 2 Flame Retardant 2 Flame Retardant, Winged 2 Heat Shrinkable Insulated Male Disconnect 2 Heavy Duty 2 In-Line 2 Locking, Long Sleeve 2 Long Sleeve, Round 2 Loose Piece, Short Sleeve 2 Nylon Insulated Open Top 90 Degree Flag Female Disconnect 2 Nylon Insulated Wire Joint 2 One Load, Plug 2 Parallel 2 Partially Insulated 2 Swept Wing 2 Terminal Kit 2 Tubular 2 YS, Long Barrel 2 1/0 - 350 Mechanical Pin Adaptor; Off-Centered Pin 1 2-Piece, Large, Robertson Set Screw 1 2-Position 1 2-Wire Standard Version 1 4D 1 90°, Flag, Non-Insulated 1 ACM, Long Sleeve, Round/Sector-Shaped 1 ACM:AL PIN 1 ACO:AL OFFSET PIN 1 AYP, Straight, Insulated 1 BA-EL, Locking, Short Sleeve 1 Bell End, Long Barrel 1 Brazed Seam 1 Build-Up 1 C-Tap 1 Combination 1 Compression Grounding 1 Cross Grid 1 Double Crimp 1 Double Crimp, Locking 1 Ergonomic Winged 1 Female Disconnect 1 Ferrule Kit 1 Flag, Straight 1 Flame Retardant, Swept Wing 1 Flame-Retardant 1 Flanged Tongue 1 Flanged, Insulated, Short Sleeve 1 Fully Insulated, Wing, Straight Angled, Standard, Flame-Retardant 1 Gel Filled 1 Heat Shrink Butt Splice 1 Heat Shrinkable 1 Heavy Duty, Non-Insulated 1 High Temperature, Twist 1 Insulated, Multiple 1 Insulated, Non-Winged 1 Locktite Connectors 1 Long Barrel 1 Long Sleeve, Standard 1 Long, Round 1 Long, Round, Offset 1 Loose Piece, Flat 1 Loose Piece, Standard 1 Loose Piece, Standard, Flat 1 Luminaire Disconnect 1 Mini 1 Model 60® Wire Connector 1 Model 61® Wire Connector 1 Model 62® Connector 1 Model 63® Connector 1 Model 64° Connector 1 Motor Pigtail Connector with Boot 1 Non-Insulated Adapter 1 Non-Insulated Butt Splice 1 Non-Insulated Fork Terminal 1 Non-Insulated Locking Fork Terminal 1 Non-Insulated Rectangular Ring Terminal 1 Non-Insulated, Plug 1 Non-Insulated, Short 1 Non-Insulated, Short Sleeve 1 Non-Insulated, Short Sleeve, Parallel 1 Non-Insulated, Straight 1 Non-Winged, Flame Retardant 1 Nylon Insulated 1 Nylon Insulated Female Disconnect 1 One Load, Short 1 Partially Insulated, Loose Piece 1 Pin Terminal 1 Qp-F, Partially 1 Rectangular 1 Rounded Wing, Flame-Retardant 1 Short 1 Short Sleeve, Expanded, Locking 1 Short Sleeve, Flanged Tongue 1 Short Sleeve, Heavy Duty 1 Short Sleeve, Type A 1 Short, One Load 1 Single Conductor Terminal 1 Small Set Screw 1 Smooth 1 Smooth Entry 1 Splice Cap 1 Standard Version, Double Conductor Terminal 1 Standard Version, Short Sleeve, Parallel, Aircraft 1 Straight Angled 1 Straight Angled, Contoured Winged 1 Twin Insulated 1 Type F, 1-Piece 1 Type F, Male 1 Type II Winged 1 UL Model, Loose-Piece, Long Sleeve 1 Vinyl Insulated Butt Splice 1 Vinyl Insulated Flanged 1 Vinyl Insulated Heavy-Duty Ring Terminal 1 Vinyl Insulated Pin Terminal 1 Winged, Insulated 1

3/0 AWG 10 500 kcmil 10 350 kcmil 9 1/0 AWG 8 18-12 AWG 8 10-12 AWG 5 24-12 AWG 5 18 AWG 4 18-10 AWG 4 12-18 AWG Solid, 12-14 AWG (19 Strand or Less) Stranded, 12-14 AWG (19 Strand or Less), #16 AWG (26 Strand or Less), #18 AWG (16 Strand or Less) Stranded Tin-Bonded 3 22-8 AWG Copper 2 0 - 21.14 mm² 1 22-14 AWG 1 4/0 AWG 18 12 - 10 AWG 17 2 AWG 14 22 - 16 AWG 13 18-12 AWG Solid, 16-12 AWG Stranded 11 4 AWG 11 16 - 14 AWG 10 18 - 14 AWG 10 2/0 AWG 10 1 AWG 8 10 AWG 7 14-10 AWG 7 20-12 AWG Solid, 18-12 AWG Stranded 7 12 AWG 6 22 - 18 AWG 6 400 kcmil 5 1.5 - 2.5 mm² 4 14 AWG 4 18-22 AWG 4 300 kcmil 4 13.3 mm² 3 16 AWG 3 22 AWG 3 3/0 AWG Stranded 3 (3)12-(1)6 AWG Solid/Stranded 2 (3)22-(3)10 AWG 2 0.32 mm² 2 1 AWG Stranded 2 1.3 mm² 2 1/0 AWG Stranded 2 12-10 AWG Aluminum, 18-10 AWG Copper 2 18-14 AWG Stranded 2 18/2-16/2 AWG 2 18/4-12/2 AWG 2 2/0 AWG Stranded 2 20-12 AWG Solid, 16-12 AWG (19 Strand or Less) 18 AWG (7 Strand), 18-14 AWG (19 Strand or Less) Stranded Tin-Bonded 2 21.15 mm² 2 22/2-12/4 AWG 2 26-22 AWG 2 33.6 mm² 2 4 - 6 mm² 2 4 AWG Stranded 2 4/0 AWG Stranded 2 6 AWG Aluminum, 8 AWG Copper 2 6 AWG Stranded 2 6-5 AWG 2 750 kcmil 2 9-7 AWG 2 #2 AWG 1 #6 - #4 AWG 1 (2) 18 AWG Minimum, (3) 10 AWG Maximum 1 (2) 18 AWG Minimum, (3) 14 AWG Maximum 1 (2) 18-4 AWG 1 (2)14-(3)12 AWG 1 (2)18-(3)12 AWG 1 (2)18-(4)10 AWG Solid/Stranded 1 0 - 375 mm² 1 0 - 42.409 mm² 1 0-14 AWG 1 0.33 mm² 1 0.5 - 1 mm² 1 0.5 - 1.5 mm² 1 0.5 mm² 1 1 AWG Aluminum, 3 AWG Copper 1 1-22 AWG, 1-20 AWG Minimum, 3-16 AWG Maximum 1 1/0 AWG - 350 kcmil, 6-1/0 AWG 1 1/0 AWG Aluminum, 2 AWG Copper 1 10 - 8 AWG 1 1000 kcmil 1 12 - 3 AWG Minimum, 6 - 2 AWG Maximum 1 12 AWG Aluminum and 18-10 AWG Copper 1 12-10 AWG Expanded 1 12-10 AWG Stranded 1 12-10 AWG, 3.3 mm² 1 12-4 AWG 1 12-5 AWG 1 14-12 AWG 1 14-12 AWG Aluminum/Copper 1 14-2 AWG Minimum, 10-3 AWG Maximum 1 14-4 AWG 1 14-6 AWG 1 14/3-12/4 AWG 1 16-12 AWG, 1.3 - 6.2 mm Combined Wire, 1.29 - 2.05 mm Round, 1.27 - 2.03 mm Rectangular 1 16-14 AWG Copper 1 16-14 AWG Expanded 1 16-14 AWG, 1.5 - 2.5 mm² 1 177.34 mm² 1 18-10 AWG Aluminum/Copper 1 18-12 AWG Solid, 14-12 AWG Stranded, 12-14, 16, 18 AWG Stranded Tin-Bonded 1 18-14 AWG, 0.82 mm² 1 18-4 AWG 1 18-8 AWG 1 2 AWG Aluminum, 4 AWG Copper 1 2 AWG Stranded 1 2 AWG Stranded, 35 mm² For Class 2 Conductor 1 2-14 AWG Minimum, 3-12 AWG Maximum 1 2-18 AWG Minimum, 3-10 AWG Maximum 1 2-3 AWG 1 2/0 AWG Aluminum, 1 AWG Copper 1 2/0 AWG Stranded, 70 mm² For Class 2 Conductor 1 2/0, 3/0, 1, 1/0 AWG Run 1 2/12 AWG 1 20 AWG 1 20-10 AWG, 18-8 AWG 1 20-14 AWG 1 20-22 AWG 1 22 - 12 AWG, 20 - 2 AWG Minimum, 14 - 3 AWG Maximum 1 22 To 8 AWG 1 22-10 AWG 1 22-10 AWG Solid and Stranded Copper, 12-10 AWG Solid Copper Clad 1 22-12 AWG 1 22-14 AWG (Minimum (1) 18 AWG and (2) 20 AWG, Maximum (2) 14 AWG) 1 22-14 AWG, 18-8 AWG 1 22-16 AWG Stranded 1 22-2 AWG, 20-1 AWG Minimum, 8-2 AWG Maximum 1 24-12 AWG Solid/Stranded 1 250 MCM 1 250 kcmil, 120 mm² For Class 2 Conductor 1 26-19 AWG 1 266.8 - 397.5 kcmil Stranded ACSR (Run), 250 (37) - 400 (37) kcmil Stranded Aluminum/Copper (Run), 6-2/0 AWG Solid Aluminum/Copper (Tap), 6-1/0 AWG ACSR (Tap) 1 3.3 mm² 1 3/0 AWG Aluminum, 1/0 AWG Copper 1 300 kcmil - 4/0 AWG 1 350 MCM 1 350 kcmil, 185 mm² For Class 2 Conductor 1 4 - 3 AWG 1 4 AWG Aluminum, 6 AWG Copper 1 4/0 AWG Aluminum, 2/0 AWG Copper 1 4/0, 2/0, 3/0, 1/0, 2, 4, 6, 3 AWG Run 1 4/0, 3/0, 1, 1/0, 2, 3 AWG, 266.8 KCMIL Run 1 5/12 AWG 1 500 MCM 1 53.47 mm² 1 6-14 AWG 1 6-2 AWG Run 1 600 - 400 kcmil 1 700 MCM 1 700, 750, 900 kcmil 1 8 AWG Aluminum, 10 AWG Copper 1 8-1 AWG 1 8.36 mm² 1 Run: 2-3/0 AWG ACSR, 1-3/0 AWG Compressed ACSR, 1-3/0 AWG Stranded Aluminum and Copper, 1/0-3/0 AWG Compressed Aluminum, Tap: 14 AWG Solid - 8 AWG Stranded Aluminum and Copper 1

MIL-STED DATA PRODUCTS 2 LEGRAND 1

Wieland Electric 7 Techspan 6 Weidmuller 4 MARRETTE 2 Pan-Term® 2 3M™ 1 BLACKBURN 1 Belden 1 Holland 1 Ideal Industries 1 Ortronics 1 Sta-Kon 1

Pan-Term® 626 Hylink™ 39 Catamount® 36 Pan-Lug™ 36 Vinylug™ 23 Spec-Kon® 20 Burndy 11 Pushwire® 11 Wire-Nut® 11 Hyplug™ 10 Wall-Nuts™ 9 Canadian WireTwist™ 8 ClearChoice 8 Dry-Shrink 8 Reel Smart™ 7 Twister® 6 Vinylink™ 6 Dragon Tooth® 5 Fingrip™ 5 Wing Nut® 5 B-Cap® 4 Blackburn® 4 Hylug™ 4 ILSCO 4 Performance Plus™ 4 UnderGround® 4 Cabelok Crimpit™ 3 Hysplice™ 3 Supra-Grip® 3 Twister® ProFLEX™ 3 Blackburn®, E-Z-Ground® 2 Crimpit™ 2 DIN 46228 Part 4, UL 486F Listed, CSA 2 Industrial Reels 2 Twister® ProFLEX™ Max 2 Twister® ProFLEX™ Plus 2 Twister® Proflex™ 2 Type DNF 2 Type FO 2 Burndy Canada 1 DiscoGrip™ 1 Ferrule Assortment Kits 1 Greenie® 1 Highland™ 1 Hygrid™ 1 In-Sure® 1 Klippon® 1 Mole™ 1 OptiCam® 1 Pin Adaptor 1 Scotchlok™ 1 Snap-N-Seal 1 Splice 1 SpliceLine 1 Twister® PRO 1 WingTwist™ 1

35000 V 4 600V 4 1000 V 3 600 VAC 3 1000 VAC/VDC 2 400 V 2 NA kV 2 2000 V 1 35 V 1 400 VAC 1 450 V 1 5 kV 1 600 - 35000 VAC 1 600 V, 1000 V Fixture and Sign 1

Copper Alloy 3 Copper, PVC 3 Tin-Plated Copper 3 High-Conductivity Wrought Aluminum 2 Nickel Alloy, Copper 2 Phenolic 2 Steel 2 Tin Plated Steel 2 Brass with Zinc Nut 1 Brass, Copper 1 Copper Sleeves 1 Copper, Nylon Insulation 1 Copper, PA Insulation 1 Copper, Polyamide 1 Copper, Tin Plated Heat Shrinkable Polyolefin 1 CuSn 1 Nylon, Tin Plated 1 Plastic 1 Polypropylene 1 Pure Electrolytic Copper 1 Steel, Copper Sleeves 1 Tin Plated Copper 1 Vinyl 1

No Finish Applies 1

Gray 9 Brown 8 Black,White 4 Silver 4 Orange 3 Pink 3 Copper 2 NA 2 Purple 2 Silver,White 2 Tan 2 Turquoise 2 Beige 1 Colorless 1 Gold Iridite Plated 1 Metallic/Copper Plated 1

Fork Terminal 40 Non-Insulated Ring Terminal 30 Non Insulated Ring Terminal 20 Ring Terminal 20 Bi-Metal Pin Connector with Shrink Insulator 16 Non-Insulated Fork Terminal 16 Insulated Male Disconnect Terminal 15 Motor Pigtail Female Disconnect 15 Motor Pigtail Male Disconnect 13 Compression Pigtail Adapter 12 Non Insulated Compression Butt Splice 11 Push-In Wire Connector 11 Wire Joint 11 Female Disconnect 10 Bi-Metal Pin Connector 9 Butt Splice Connector 9 Compression Sleeve 9 Butt Splice 8 Non-Insulated Female Disconnect 8 Compression Pin Adapter 7 Splicing Connector 7 Pin Terminal 6 Heat Shrink Butt Splice Connector 5 Male Disconnect 5 Non Insulated Fork Terminal 5 Pin Connector 5 Splice Connector 5 Insulated Locking Fork Terminal 4 Non Insulated Female Flag Disconnect Terminal 4 Solid Offset Pin Adapter with Insulating Boot 4 Compression Cable Joint Connector 3 Compression Splice 3 Crimp-On Wire Joint 3 Disconnects Terminal 3 Fully Insulated Male Tab 3 Insulated Female Disconnect 3 Partially Insulated Female Disconnect 3 Pigtail Adapter 3 Wire End Ferrule 3 Wire Terminal Kit 3 Bare Ferrule 2 Compact Compression Connector 2 Crimp Connector 2 Expanded Insulated Ring Terminal 2 Fully Insulated Female Disconnect 2 Inline Splicing Connector with Lever 2 Insulated Fork Terminal with Flanged Tongue 2 Line Tap Connector with Adjustable Overhanging Spacer 2 Luminaire Disconnect 2 Mini Wire Connector 2 Non-Insulated Male Tab 2 Off-Set Compression Pigtail Adapter 2 Partially Insulated Male Disconnect 2 Pin Adapter 2 Terminal Kit 2 Twist-On Combination Wire Connector 2 Barrel Compression Sleeve 1 C-Crimp Connector 1 C-Tap Round Crimp Connector 1 Compression Connector 1 Compression Crimp Connector 1 Crimp Connector with Adjustable Overhanging Spacer 1 Crimp Connector with Ring 1 Crimp Insulated Ring Terminal 1 Cross Connector 1 Expanded Insulated Fork Terminal 1 Ferrule Kit 1 Fully Insulated Male Disconnect 1 IDC Butt Splice Connector 1 Insulated Butt Splice 1 Insulated Butt Splice Kit 1 Insulated Coupler 1 Insulated DIN Ferrule 1 Insulated Male Tab 1 Insulated Pin Adapter 1 Insulated Ring Tongue Terminal 1 Insulated Twin Wire Ferrule 1 Jak-Pak Kit 1 Loose Piece Disconnect 1 Male Tab 1 Motor Lead Pigtail Male Disconnect 1 Motor Pigtail Disconnect 1 Non-Insulated Butt Splice Connector 1 Non-Insulated Female Quick Disconnect Adapter 1 Off-Centered Mechanical Pin Adaptor 1 Offset Pigtail Adaptor with Insulating Cover 1 Partially Insulated Butt Splice Connector 1 Pigtail Connector 1 Pin Connector with Shrink Insulator 1 Push-In Connector 1 Push-In Luminaire Disconnect 1 Splice Cap Crimp Connector 1 Splicing Connector Set 1 Splicing Connector with Lever 1 Tube Kit 1 Twin Wire Ferrule 1 URD Terminal Kit 1

Brazed Seam With Insulation Support 12 Brazed/Overlapping Seam, Funnel 9 Insulation Support, Brazed Seam 6 Expanded Entry 5 PK-R 3 Brazed 2 Seamless 2 Brazed, Overlapping Seam 1 Brazed/Overlapping Seam, Deep Internal Serration 1 Insulation Support 1 Long Brazed Seam 1 NA 1 Serrated, Brazed Seam 1 Standard 1 Straight 1

42767.00 IN 5 0.112 - 0.138 in 4 0.138 - 0.164 in 4 1/4 In. 3 42826.00 IN 3 42950.00 IN 3 #6 - #8 Hole 2 #8 - 10 Hole 2 0.138-0.164 in 2 0.19 in 2 7/16 In. 2 #10, #8, #6 1 #10,#8 1 #3 - #6 1 #5 1 #5, #10 1 #6 - #8 1 #8 - #10 1 0.164 - 0.19 in 1 0.19 In. 1 0.216-0.25 in 1 0.25 in 1 1/2 In. 1 10 in 1 3 in 1 42826 1 42950 1 M10 1

0.62 in 6 0.19 in 5 0.41 in 4 0.42 in 4 0.63 in 4 0.3 in 3 0.46 in 2 1.3 in 2 0.33 in 1 0.37 in 1 0.56 in 1 0.81 in 1 3.035 in 1 3.2 in 1 5 mm 1 6 mm 1

3.3 in 2 0.34 in 1 0.35 in 1 0.55 in 1 0.57 in 1 0.59 in 1 0.594 in 1 0.66 in 1 0.72 in 1 0.728 in 1 0.75 in 1 0.93 in 1 1.23 in 1 1.38 in 1 1.43 in 1 1.44 in 1 1.64 in 1 1.82 in 1 1.85 in 1 1.89 in 1 10 mm 1 12 mm 1 16 mm 1 2-1/2 in 1 2-1/8 in 1 2.38 in 1 2.44 in 1 2.5 in 1 2.55 in 1 2.61 in 1 2.63 in 1 2.82 in 1 20 mm 1 22 mm 1 25.5 mm 1 254 mm 1 3-1/8 in 1 3-3/8 in 1 3.18 in 1 3.47 in 1 3.57 in 1 3.58 in 1 3.6 in 1 3/4 in 1 30 mm 1 305 mm 1 356 mm 1 360 mm 1 4.00 in 1 4.35 in 1 4.4 in 1 9.75 in 1

0.187 x 0.032 in 1 0.25 x 0.032 in 1 1/4 x 0.03 in 1 4.8 x 0.5 mm 1

1.34 in 1 1.45 IN 1 1.46 in 1 1.89 in 1 1.95 in 1 12 - 10 in 1 12-10 1 16-14 1 2.44 IN Length X 19 IN Dimension B 1 3-1/8 IN Length 1 3-3/8 IN Length 1